• Banner March 2014
  • Color_Box_Photo
  • metzger-home-slide-3
  • metzger-home-slide-4.2
  • Industrial and Retail Concrete Floor Joint Fillers and Repair Products

    “Known by the Floors We Protect” for More than 40 Years
  • ColorFast Floor Joint Fillers and Repair Materials

    A complete line of standard and custom colored materials to meet your project’s needs
  • Industrial Concrete Floor Repair Solutions

    Highest quality repair materials and expert support ensure long-lasting repair solutions
  • Stained/Polished Concrete Floor Remodel and Repair

    Wide selection of colored repair materials to expertly restore existing concrete floors

Our Products

 

For more than 40 years Metzger/McGuire has been a leading manufacturer of industrial concrete floor joint fillers and repair products.

From our MM-80 Heavy Duty, Semi-Rigid Epoxy Joint Filler and Spal-Pro series of rapid set polyurea joint fillers to our durable concrete floor repair products you can count on superior quality and technical support when choosing any of our products for your project.

All Metzger/McGuire industrial floor joint fillers and concrete repair products are 100% solids and are complaint with the U.S. Green Building Council’s LEED (Leadership in Energy and Environmental) standards and are acceptable for use in facilities subject to regulation by USA, FDA and CFIA.

Metzger/McGuire Epoxy and Polyurea Joint Filler Comparison Chart

MM-80 MM-80

MM-80 is a 100% solids, two component, heavy duty semi-rigid epoxy joint filler designed to fill and protect contraction and construction joints in industrial concrete floors. The industry’s first semi-rigid joint filler and still widely known as the “industry standard” in floor joint protection.

MM-80P MM-80P

MM-80P is a 100% solids, two component, heavy duty semi-rigid epoxy joint filler designed to fill and protect contraction and construction joints in industrial concrete floors. MM-80P is a rebalanced version of our MM-80 offering a 1:1 mix ratio for use with dual component pumps.

Spal-Pro RS 88 Spal-Pro RS 88

Spal-Pro RS 88 is a 100% solids, two component heavy duty, semi-rigid polyurea joint filler intended for use in filling and protecting contraction and construction joints in industrial, retail or commercial concrete floors.

Spal-Pro RS 65 Spal-Pro RS 65

Spal-Pro RS 65 is a 100% solids, two component rapid setting semi-rigid polyurea joint “sealant” intended for use in filling and protecting contraction and construction joints in retail or commercial concrete floors.

Spal-Pro RSF Spal-Pro RSF

Spal-Pro RSF is a 100% solids, two component heavy duty, semi-rigid polyurea joint filler intended for use in filling and protecting contraction and construction joints in industrial and freezer/cooler concrete floors. RSF can be applied in temperatures as low as -30ºF (-35ºC).

Spal-Pro 2000 Spal-Pro 2000

Spal-Pro 2000 is a 100% solids, two component heavy duty, semi-rigid polyurea joint filler intended for use in repairing joints and cracks in industrial and freezer/cooler concrete floors. Spal-Pro 2000 can be applied in temperatures as low as -30ºF (-35ºC) and allows for a return to service in 30 minutes or less.

Rapid Refloor Rapid Refloor

Rapid Refloor is a 100% solids, two component, low viscosity structural polyurea/polyurethane hybrid intended for use in repairing cracks and small surface defects such as bolt holes and pop-outs in industrial, retail or commercial concrete floors. Rapid Refloor’s rapid set chemistry allows for return to service in 30 minutes or less.

Armor Hard Armor Hard

Armor-Hard is a 100% solids, two component structural epoxy mortar kit intended for use in the structural repair or joints, cracks and other surface defects in industrial concrete floors. Armor-Hard Kit comes with a specially engineered aggregate blend designed for easy troweling/finishing.

Armor Hard Extreme Armor Hard Extreme

Armor-Hard Extreme is a 100% solids, two component fast set structural epoxy/epoxy mortar kit intended for use in the structural repair or joints, cracks and other surface defects in industrial concrete floors. Armor-Hard Extreme’s fast set chemistry allows for return to service in as little as 2 hours and allows for installation in temperatures as low as 20ºF (-7ºC). Kit includes a specially engineered aggregate blend designed for easy troweling/finishing.

Spal-Pro Stabilizer Spal-Pro Stabilizer

Spal-Pro Stabilizer is a 100% solids, two component semi-rigid polyurea polymer intended for use in underslab stabilization of deflecting/rocking concrete floor panels. Spal-Pro Stabilizer allows for return to service in 60 minutes or less.

Stabilizer EXP Stabilizer EXP

Spal-Pro Stabilizer EXP is a 100% solids, two component, high-density hydrophobic polyurethane expanding foam for use in underslab stabilization of deflecting/rocking concrete floor panels. Spal-Pro Stabilizer EXP allows for return to service in 60 minutes or less.

SPF SPF

SPF is a water based single component film forming liquid intended for use in the protection of concrete slab surfaces against staining which can result from polyurea or epoxy joint filler overfill. SPF is water soluble and can be easily removed after joint filler installation is completed.

M-Flush M-Flush

M-Flush is a voc-free single component polymer intended for use in cleaning and maintaining dual component pumps used for the installation of joint fillers. M-Flush can be used for flushing polyurethanes, polyureas and polyurethanes from pump equipment and parts.

ColorFast ColorFast

Metzger/McGuire's Industry Standard Floor Joint Fillers and Concrete Repair Products to provide your customer with surface restoration products manufactured to exacting color match standards.